A New Level of Stone and Tile Care.

You put a lot of time and thought into your design decisions. Probably a lot of money too. MORE™ Surface Care is worthy of that investment. Now you have the best way to protect, clean, and enhance the surfaces that grace your home and brighten your life.


Give That Beautiful New Surface Some TLC.

We all want to look our best. Consistent exercise, smart eating habits, a good night’s rest – it all pays off. The same concept applies to your natural stone, quartz, and tile. A little love on a regular basis keeps it beautiful for years to come. Of course, we recommend using MORE™.  Well, because we love it and think you’ll love it too.


The Nature of Natural Stone and Tile.

That stone of yours may be hard as a…rock. But, it’s actually porous. That’s why sealing is important – when there’s a spill, your stone will be protected from any permanent staining. Just clean it up and you’re good to go.


Natural Stone and What it Needs.

Your installer or fabricator may have already sealed the surface. How do you know if it’s been properly sealed? Pour a few drops of water on the surface – after a few minutes check to see if the water soaked in. If the surface darkened, it means the water got in – the stone needs to be sealed.  MORE™ makes it’s easy to choose and use the right sealer. Our MORE™ Premium Stone Sealer is the best choice for peace of mind and maximum stain protection on even the most porous stones.


About Ceramic, Porcelain & Grout

Porcelain and ceramic tile are now available in attractive matte finishes and textures. They can even be mistaken for natural stone. MORE™ makes caring for these new finishes almost effortless. Our MORE™ Grout, Ceramic & Porcelain Sealer protects the entire surface and makes daily cleaning a snap.


About Quartz

Quartz surfaces are low in porosity and thus stain resistant. The thing is, manufacturers recommend using “mild, non- abrasive” cleaners to keep quartz surfaces looking sharp.  MORE™products meet the recommended requirements of quartz and engineered stone. That’s a fancy way of saying it will stay clean and streak-free.


The Best Protection is Prevention.


Always use coasters and placemats. The acidic nature of juices, sodas, coffee and other beverages, as well as oil-based products and certain condiments, can discolor and stain your stone countertops. Sure, marble, limestone, and concrete are hard, but they can still scratch. So, put something under cups, plates, and utensils.

Place hot cookware and dishes on some sort of mat. High temperatures don’t mix with natural stone, quartz, and tile.

Stains like procrastinators. The longer you wait to clean it up, the higher the chance of staining and discoloring.


Don’t Panic. Call us.

If you have a problem with your natural stone, quartz or tile surface take a deep breath and relax. Call our friendly support team at 1-844-404-MORE.  Whether you click or call, we’ll help get your stone, quartz, or tile surfaces looking new again.

Sorry, We Don’t Do Windows.

While run of the mill cleaners do 101 things, MORE™ is made for only one reason – to care for natural stone, quartz, and tile. We formulated (with the help of super smart scientists) the products specifically to preserve the beauty of your surfaces for years to come.

The stuff on supermarket shelves degrades protective sealers, leaving the surface open to stains. And, some contain harsh ingredients like bleach, ammonia, abrasives, and vinegar. Those don’t belong anywhere near your stone, quartz, and tile countertops and floors.


Safer Ingredients, So It’s Safer For You.

Clean water or petroleum-based solvents? When it comes to cleaning and protecting the areas where you cook, entertain, play, bathe, and sleep, it’s really a no-brainer.  MORE™ products are water-based and have less impact on indoor air quality. Compared to solvent-based products, the MORE™ lineup reduces VOC emissions by up to 90%.



Some Handy Care Tips:

Kitchen and Bathroom Counters

A lot of the items you use and consume are acidic, a quality which isn’t friendly to some natural stone. Remnants of things like toothpaste and makeup, orange juice, oils, and coffee can cause damage. Sure, everyone gets messy from time to time. Just be sure to tidy up with MORE™ Stone & Quartz Cleaner + Protector using a clean, dry cloth.



With the constant walking around, it’s important to clean the floors often (whatever that might mean to you). As a smart 1-2 punch, use a dry dust mop, broom or vacuum to gather up loose dirt and debris. Then use a damp mop with MORE™    Stone & Tile Cleaner, a concentrated cleaning solution gentle enough for daily use – it’ll leave the floors clean and streak free.


Bath and Shower

We don’t know who came up with the term “soap scum” but we do know how to get rid of it, as well as hard water deposits. To keep your natural stone and tile looking fantastic, use MORE™ Alkaline Cleaner to remove soap scum and MORE™Acidic Cleaner to blast through hard water stains. Be sure NOT to use MORE™ Acidic Cleaner on acid-sensitive surfaces like marble, limestone, travertine, onyx, and concrete.


We call it  “a line of products”. You’ll call them “easy to choose and easy to use”.



Our high-performance, water-based, penetrating natural stone sealers form an invisible barrier that provides maximum protection against the toughest oil and water-based stains.



These products bring out the stone’s natural color, texture, and unique character. Like everything else we offer, our enhancers are water-based, easy to use, and work great.



Our safe and effective cleaners are specifically designed for natural stone, tile, and quartz surfaces and are available in two types:

  • Heavy duty cleaners for restorative cleaning
  • Daily maintenance cleaners for gentle cleaning that leave surfaces streak free and looking new